HP BIOS Configuration Utility (BCU)
Hp Power Manager Utility Software For Windows 8.1 Download
Download HP Recovery Manager Utility 1.1610.2.0 Rev.1 for Windows 10 64-bit (Other Drivers & Tools). Battery Health Manager in the BIOS provides a number of settings designed to improve battery longevity and performance for select HP business computers. For a list of supported computer models and BIOS updates to enable Battery Health Manager on those platforms, go to New Battery Health Management Feature Can Prolong Battery Life.
![Hp Power Manager Utility Software For Windows 8.1 Hp Power Manager Utility Software For Windows 8.1](https://www.troublefixers.org/wp-content/uploads/2015/08/Device-Manager-in-HP-Laptop.png)
DESCRIPTION:
Download film surga yang tak dirindukan. This package provides the HP BIOS Configuration Utility (BCU) for supported notebook, desktop, and workstation models that are running a supported operating system.
Version | SoftPaq # | Date | OS | SoftPaq Exe |
---|---|---|---|---|
4.0.32.1 | sp107705 | 08/20/2020 | Windows (7,8,8.1,10) | sp107705.exe |
VERSION 4.0.32.1
- Adds PFX files with passwords on private key
- Use /setvalue command with a provided password file when BIOS password is set on system
- Fixes where using /addauthstr on a full repset file containing read only settings causes an error to occur
- Fixes where BIOS returns a non-zero (fail) result and BCU is incorrectly reporting success
- Fixes where BCU can set successfully when set the MPM counter to a non-integer value (eg. 5C1)
VERSION 4.0.30.1
- Adds Support for HP Sure Admin
VERSION 4.0.26.1
Hp Power Manager Utility Software For Windows 8.1 64-bit
- Fixes an issue where the boot order would be set incorrectly on some systems.
VERSION 4.0.25.1
- Messaging added to notify the user that a system reboot is necessary for updatted settings to take effect.
- Fiexes an issue where adding 'Disabled' to a boot option doesn't update correctly in F10 setting.
VERSION 4.0.24.1
- Enhance to automatically add system's boot order value in the BIOS config file. For example: If an additional device added to the system (e.g USB Hard drive) after BCU read, BCU will automatically add this entry under to BCU config file. Note: BCU will ignore to add the device if it is not in BIOS API.
Hp Power Manager Utility Software For Windows 8.1 Windows 10
VERSION 4.0.23.1
- Fixes an issue where the BIOS Configuration Utility does no replace the older BCU version when an update is run.
- Provides the ability to specify the location to save log files using the /logpath parameter.
/logpath:'full path' (e.g. BCU.exe /get:repset.txt /logpath:'c:BCUlogsmylog.txt') - Provides a warning message when incomplete settings or values for settings are not detected.
Hp Power Manager Utility Software For Windows 8.1 Windows 7
VERSION 4.0.21.1
- Added support for single value get (/getvalue:'setting name') and save it to a file.
- Fixed BCU crash issue where the BCU config file contains incomplete settings value. BCU now errors out if missing the setting's value and reports 'invalid setting value'
- Updated with new HPQPwd.exe and HPQPwd64.exe version 1.0.27.1.
- Re-signed BCU with HP Inc.
VERSION 4.0.18.1
- Fixed an issue where the BIOS Configuration Utility clears the current BIOS administrator password when the incorrect BIOS password is input
- Improves the BIOS update installation process
VERSION 4.0.15.1
- Added support Windows 10.
- Fixed the issue when setting a blank setting value, BCU no longer stops working.
- Fixed the issue of BCU stops working when generating repset file with command 'BiosConfigUtility64.exe /getconfig:test.txt /log'
- Resolved the issue of failing to use parameter/setdefaults to modify BIOS information when BIOS password is set.
- Resolved getting an operation failed error message when doing a setconfig via BCU, because of adding capability to handle an ordered list with only one item, so it reports it as an invalid value.
VERSION 4.0.13.1
- Fixed the issue where the 'TPM Activation Policy' and 'TPM Reset to Factory Defaults' settings are not exposed in the repset file.
- Fixed crashing issue when setting a blank repset file .
- Fixed crashing issue when setting a repset file in which there is a space in front of last row.
VERSION 4.0.11.1
- Compiled for Windows 7 and WinPE 3.0 or later, functionality on earlier versions not supported.
- Deprecated BIOS User support:
+ /CreateUser and /DeleteUser are no longer supported. - Config file keyword changed to 'BIOSConfig' followed by file format version '1.0'. Previous keyword 'English' still supported for backwards compatibility.
- Included HPQPswd utility in the installation
- Added new commands:
+ /unicode: query if system supports Unicode password and return, intended for batch file use
+ /getvalue: get value of given setting without using config file
+ /setvalue: set value of given setting without using config file
+ /log: generate the log file - Added BCU current setup password command line /cpwdfile to match SSM
VERSION 3.2.3.1
- Removed user guide from installation.
- Added shortcut to user's guide on web.
- Fixed failures when enumeration values contained the string 'Disable'.
- Fixed error when BCU return error code 16 in WinPE 4.0 32-bit.
VERSION 3.0.13.1
- Removed repair support from Control Panel.
- Removed clear text passwords from /CreateUser. Replaced by password file.
- Added comments to setting file when a /getconfig action is performed.
- Allowed only one /curspwdfile option. Return error 15 if specified more than once.
- Added /WarningAsErr option to include warnings in final BCU return code. Without this option, warnings are ignored and BCU returns Zero(0=success) if there are no actual errors while writing.
- Updated help message to match User guide.
- Updated User Guide to explain: Return code 16; BIOS write stickiness.
VERSION 3.0.3.1
- Added support for BIOS setup password as an encrypted file. The file name is passed on the command line.
+ Passwords are created with HPQPswd.exe - Removed support of BIOS setup password as clear text on command line.
- Removed support for sending multiple current passwords in a single execution.
+ User may send only one current encrypted password file each time the program is run - Changing current BIOS setup password requires providing name of current and new encrypted password files.
VERSION 2.60.13.1
- Changed message when BCU executes successfully.
- Added additional return codes when encountering WMI errors:
+ Return code 23: 'System not supported. Unable to connect to WMI HP_InstrumentedBIOS
+ Return code 25: 'System not supported. Unable to connect to PUBLIC WMI namespace - Note: Code attempts to connect to following sequence:
1) Public WMI namespace
2) HP WMI namespace
3) HP_InstrumentedBIOS - Example: Return code 24 indicates the application has successfully connected to Public WMI namespace but was unable to connect to HP WMI namespace or HP Instrumented BIOS. This condition will exist for non-HP systems and may also exist for HP systems using an outsourced BIOS (example - older entry level home or student platforms).
VERSION 2.60.3
- Added support for comment lines in configuration file.
- Added short command line parameters /Get and /Set equivalent to /GetConfig and /SetConfig respectively.
- Added /SetDefaults option to set the system BIOS settings to pre-set defaults.
/GetConfig or /SetConfig options are ignored if specified with /SetDefaults. - Added installer which copies the utility(both 32 and 64 bit) to program files folder and creates a link to the user guide.
VERSION 2.50.3.1
- Split from SSM
- Added 32bit/64-bit Windows 8 support
- Added 64-bit support
- Released as a separate SoftPaq
- Fixed issue where BCU was missing the last setting in /Getconfig.
- BCU now reports the return value of BIOS call in /verbose mode when reporting success of each setting change.
- Prior versions attempted to re-read settings for confirmation which could report false failure for a setting requiring a reboot prior to completion.
- This is a change in the BCU reporting method. BCU will now report success or failure of the request made to BIOS. Any changes requiring a reboot must still occur before the change takes effect.
- In /verbose mode, when reporting the success of each setting change, BCU now uses the return value from the BIOS call.
- Previously BCU read back the setting value and compared it to previous value to decide if it was successfully changed. This created problems sometimes when the setting value does not take effect immediately but needs a reboot.
- Fixed a bug where BCU was missing the last setting in /Getconfig.
- BCU now reports the return value of BIOS call in /verbose mode when reporting success of each setting change.
- Prior versions attempted to re-read settings for confirmation which could report false failure for a setting requiring a reboot prior to completion.
- This is a change in the BCU reporting method. BCU will now report success or failure of the request made to BIOS. Any changes requiring a reboot must still occur before the change takes effect.
- Added support for ':', '', '?' characters in password.
VERSION 2.15.A
![Hp power manager utility software for windows 8.1 download Hp power manager utility software for windows 8.1 download](https://www.lifewire.com/thmb/jmX3ycYUS5c04arIGphAwYzCmZc=/1002x668/filters:fill(auto,1)/system-information-windows-10-bios-version-date-5a8de357fa6bcc003700bf88.png)
DESCRIPTION:
Download film surga yang tak dirindukan. This package provides the HP BIOS Configuration Utility (BCU) for supported notebook, desktop, and workstation models that are running a supported operating system.
Version | SoftPaq # | Date | OS | SoftPaq Exe |
---|---|---|---|---|
4.0.32.1 | sp107705 | 08/20/2020 | Windows (7,8,8.1,10) | sp107705.exe |
VERSION 4.0.32.1
- Adds PFX files with passwords on private key
- Use /setvalue command with a provided password file when BIOS password is set on system
- Fixes where using /addauthstr on a full repset file containing read only settings causes an error to occur
- Fixes where BIOS returns a non-zero (fail) result and BCU is incorrectly reporting success
- Fixes where BCU can set successfully when set the MPM counter to a non-integer value (eg. 5C1)
VERSION 4.0.30.1
- Adds Support for HP Sure Admin
VERSION 4.0.26.1
Hp Power Manager Utility Software For Windows 8.1 64-bit
- Fixes an issue where the boot order would be set incorrectly on some systems.
VERSION 4.0.25.1
- Messaging added to notify the user that a system reboot is necessary for updatted settings to take effect.
- Fiexes an issue where adding 'Disabled' to a boot option doesn't update correctly in F10 setting.
VERSION 4.0.24.1
- Enhance to automatically add system's boot order value in the BIOS config file. For example: If an additional device added to the system (e.g USB Hard drive) after BCU read, BCU will automatically add this entry under to BCU config file. Note: BCU will ignore to add the device if it is not in BIOS API.
Hp Power Manager Utility Software For Windows 8.1 Windows 10
VERSION 4.0.23.1
- Fixes an issue where the BIOS Configuration Utility does no replace the older BCU version when an update is run.
- Provides the ability to specify the location to save log files using the /logpath parameter.
/logpath:'full path' (e.g. BCU.exe /get:repset.txt /logpath:'c:BCUlogsmylog.txt') - Provides a warning message when incomplete settings or values for settings are not detected.
Hp Power Manager Utility Software For Windows 8.1 Windows 7
VERSION 4.0.21.1
- Added support for single value get (/getvalue:'setting name') and save it to a file.
- Fixed BCU crash issue where the BCU config file contains incomplete settings value. BCU now errors out if missing the setting's value and reports 'invalid setting value'
- Updated with new HPQPwd.exe and HPQPwd64.exe version 1.0.27.1.
- Re-signed BCU with HP Inc.
VERSION 4.0.18.1
- Fixed an issue where the BIOS Configuration Utility clears the current BIOS administrator password when the incorrect BIOS password is input
- Improves the BIOS update installation process
VERSION 4.0.15.1
- Added support Windows 10.
- Fixed the issue when setting a blank setting value, BCU no longer stops working.
- Fixed the issue of BCU stops working when generating repset file with command 'BiosConfigUtility64.exe /getconfig:test.txt /log'
- Resolved the issue of failing to use parameter/setdefaults to modify BIOS information when BIOS password is set.
- Resolved getting an operation failed error message when doing a setconfig via BCU, because of adding capability to handle an ordered list with only one item, so it reports it as an invalid value.
VERSION 4.0.13.1
- Fixed the issue where the 'TPM Activation Policy' and 'TPM Reset to Factory Defaults' settings are not exposed in the repset file.
- Fixed crashing issue when setting a blank repset file .
- Fixed crashing issue when setting a repset file in which there is a space in front of last row.
VERSION 4.0.11.1
- Compiled for Windows 7 and WinPE 3.0 or later, functionality on earlier versions not supported.
- Deprecated BIOS User support:
+ /CreateUser and /DeleteUser are no longer supported. - Config file keyword changed to 'BIOSConfig' followed by file format version '1.0'. Previous keyword 'English' still supported for backwards compatibility.
- Included HPQPswd utility in the installation
- Added new commands:
+ /unicode: query if system supports Unicode password and return, intended for batch file use
+ /getvalue: get value of given setting without using config file
+ /setvalue: set value of given setting without using config file
+ /log: generate the log file - Added BCU current setup password command line /cpwdfile to match SSM
VERSION 3.2.3.1
- Removed user guide from installation.
- Added shortcut to user's guide on web.
- Fixed failures when enumeration values contained the string 'Disable'.
- Fixed error when BCU return error code 16 in WinPE 4.0 32-bit.
VERSION 3.0.13.1
- Removed repair support from Control Panel.
- Removed clear text passwords from /CreateUser. Replaced by password file.
- Added comments to setting file when a /getconfig action is performed.
- Allowed only one /curspwdfile option. Return error 15 if specified more than once.
- Added /WarningAsErr option to include warnings in final BCU return code. Without this option, warnings are ignored and BCU returns Zero(0=success) if there are no actual errors while writing.
- Updated help message to match User guide.
- Updated User Guide to explain: Return code 16; BIOS write stickiness.
VERSION 3.0.3.1
- Added support for BIOS setup password as an encrypted file. The file name is passed on the command line.
+ Passwords are created with HPQPswd.exe - Removed support of BIOS setup password as clear text on command line.
- Removed support for sending multiple current passwords in a single execution.
+ User may send only one current encrypted password file each time the program is run - Changing current BIOS setup password requires providing name of current and new encrypted password files.
VERSION 2.60.13.1
- Changed message when BCU executes successfully.
- Added additional return codes when encountering WMI errors:
+ Return code 23: 'System not supported. Unable to connect to WMI HP_InstrumentedBIOS
+ Return code 25: 'System not supported. Unable to connect to PUBLIC WMI namespace - Note: Code attempts to connect to following sequence:
1) Public WMI namespace
2) HP WMI namespace
3) HP_InstrumentedBIOS - Example: Return code 24 indicates the application has successfully connected to Public WMI namespace but was unable to connect to HP WMI namespace or HP Instrumented BIOS. This condition will exist for non-HP systems and may also exist for HP systems using an outsourced BIOS (example - older entry level home or student platforms).
VERSION 2.60.3
- Added support for comment lines in configuration file.
- Added short command line parameters /Get and /Set equivalent to /GetConfig and /SetConfig respectively.
- Added /SetDefaults option to set the system BIOS settings to pre-set defaults.
/GetConfig or /SetConfig options are ignored if specified with /SetDefaults. - Added installer which copies the utility(both 32 and 64 bit) to program files folder and creates a link to the user guide.
VERSION 2.50.3.1
- Split from SSM
- Added 32bit/64-bit Windows 8 support
- Added 64-bit support
- Released as a separate SoftPaq
- Fixed issue where BCU was missing the last setting in /Getconfig.
- BCU now reports the return value of BIOS call in /verbose mode when reporting success of each setting change.
- Prior versions attempted to re-read settings for confirmation which could report false failure for a setting requiring a reboot prior to completion.
- This is a change in the BCU reporting method. BCU will now report success or failure of the request made to BIOS. Any changes requiring a reboot must still occur before the change takes effect.
- In /verbose mode, when reporting the success of each setting change, BCU now uses the return value from the BIOS call.
- Previously BCU read back the setting value and compared it to previous value to decide if it was successfully changed. This created problems sometimes when the setting value does not take effect immediately but needs a reboot.
- Fixed a bug where BCU was missing the last setting in /Getconfig.
- BCU now reports the return value of BIOS call in /verbose mode when reporting success of each setting change.
- Prior versions attempted to re-read settings for confirmation which could report false failure for a setting requiring a reboot prior to completion.
- This is a change in the BCU reporting method. BCU will now report success or failure of the request made to BIOS. Any changes requiring a reboot must still occur before the change takes effect.
- Added support for ':', '', '?' characters in password.
VERSION 2.15.A
- Versions prior to 2.50.3 were bundled with SSM and carried the same version number as the SSM version it was with. They are not available as a separate download.
PRODUCT TYPES:
- Desktops
- Notebooks
- Workstations
INSTALLATION INSTRUCTIONS:
- Download the file by clicking Download or Obtain Software button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).
- Double-click the downloaded file and follow the on-screen instructions to extract the contents of the SoftPaq.
HP Manageability Integration Kit (MIK) for Microsoft System Center Configuration Manager
Tool Name | Current Version | Date | OS Support | SoftPaq | CVA |
---|---|---|---|---|---|
HP MIK for Server | |||||
HP Manageability Integration Kit (MIK) | 4.1.4.1 | 08/05/2020 | SCCM 2012 R2 SP1 or higher | sp107364 | |
HP MIK Client requirements | |||||
HP MIK Client | 4.1.1.1 | 08/05/2020 | Windows 7/8.1/10 | sp107340 | sp107340 cva |
PREREQUISITES
- Microsoft .Net version 4.8 or above.
- HP MIK Client is required to be installed on managed platforms for MIK BIOS Configuration, Microsoft Device Guard, HP Sure Admin, HP Sure Start, HP Sure Run, HP Sure Recover, HP Sure Sense, and TPM conversion features.
- HP Collaboration Keyboard is required to install on client platforms for HP Collaboration Keyboard feature.
- HP Client Security software is required to be installed on client.
- Fingerprint Drivers are required for HP Client Security - Intel Authenticate features.
- HP Power Manager software is required to install on client system for HP Power Manager.
Note – Please refer to HP website for latest individual software versions and SoftPaqs for same. Design expert 7 serial key.
DESCRIPTION:
This package provides the HP Manageability Integration Kit plug-in for Microsoft System Center Configuration Manager.
There are many camera angles that switch from view to view depending on where Mario is at. At least this way we know Mario is super! With the impressive graphics and effects that the N64 can produce, the adventure is bound to be spectacular.Find yourself in a mirror room filled with dozens of tricks and traps or on rainbow paths that have you running for your life, trying not to fall to the ground far below. Super mario 3d world free download for android. In one instance, you may see him from a distant view while another view will be right behind him, looking up at a giant cactus.There are various rooms and tasks you have to work your way through to venture on to the next one.
Correlation meter. Download free vu meter plugin for mac. Switchable level scaling (-18 - 0 dB)Buy VU Meter. Variable sensitivity. Combines analog style and bar graph metering. Factory Refurbished - This item has been 100% tested for proper operation and carries the full manufacturer's Limited Warranty.
Broken glass sound effect for virtual dj download. Download Free Glass Shattering And Breaking Sound Effects. Free sound effects of shattering and breaking glass. Includes car window, beer bottle, wine glasses and light bulbs being broken. Highest quality HD recorded MP3 downloads. These free glass shattering and breaking sound effects can be downloaded and used for video editing, adobe.
HP MIK Server Version 4.1.4.1 / HP MIK Client Version 4.1.1.1
- HP Sure Admin – Support to manage Local Access Key on Enterprise Key Management Store.
- HP Presence Aware – Support to manage HP Presence Aware Software app.
- HP Sure Run Gen 3 – Support to add 10 Custom processes running on managed platform.
- HP Sure Recover - Support to configure OS recovery retry attempts and wait period between next retry.
- Pre-boot WiFi - Support to configure 6 WiFi profiles and the priority.
- Programmable Key - Support to program a key to launch pre-defined URLs at a press of button.
- HP Tamper Lock – Support to enable tamper protection and notifications for unauthorized chassis intrusion.
CURRENT KNOWN LIMITATIONS
- Direct upgrade to new version fails to uninstall old version. Recommendation is to manually uninstall existing version and install the current.
FEATURE SUPPORT DISCONTINUED
- Recipes as a feature has been removed from this version.
- TPM 1.2 Support.
- HP Sure Click - Trusted Site.
INSTALLATION INSTRUCTIONS
- Download the file by clicking Download or Obtain Software button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).
- Double-click the downloaded file and follow the on-screen instructions to extract the contents of the SoftPaq.